FAZUA RIDE 50 TRAIL/STREET Скачать руководство пользователя страница 16

Страница: 16 / 68

Freigabeversion

US-English | Original instructions

DANGER

Dangers due to unauthorized changes!

If you make unauthorized changes to the drive system or compo-

nents, you may cause an explosion, electric shock, or serious injury

to yourself or others.

►

Under no circumstances should you modify or alter individual

components of the drive system autonomously.

►

Never replace any drive system components independently.

►

Never open the drive system components without authorization.

The drive system components do not require any maintenance.

Only allow repairs to the drive system to be carried out by an autho-

rized specialist.

►

Only allow components of the drive system to be replaced by an

authorized specialist with permissible original spare parts.

DANGER

Fire hazard due to incorrect handling!

Improper handling of the BATTERY and/or CHARGER, or attempting to

charge batteries with an incompatible charger could cause a fire.

►

Follow all charging instructions and do not charge the BATTERY

outside of the temperature range specified in the instructions.

Charging improperly or at temperatures outside of the specified

range may damage the BATTERY and increase the risk of fire.

►

Do not modify or attempt to repair the CHARGER or the BATTERY.

►

Always use an original and compatible CHARGER from FAZUA to

charge the BATTERY.

►

Take care not to handle metal objects such as coins, paper clips,

screws, etc. in the immediate vicinity of the BATTERY and to store

the BATTERY separately from metal objects. Metal objects can close

a circuit between the terminals of the BATTERY (i.e. “short-circuit”

the BATTERY) and cause a fire as a result.

►

Do not short-circuit the BATTERY.

►

BATTERY and CHARGER may heat up during charging or operation.

Содержание RIDE 50 TRAIL/STREET




































































Результаты поиска

Содержание RIDE 50 TRAIL/STREET

Отзывы:

Похожие инструкции для RIDE 50 TRAIL/STREET

Бренды по названию

Популярные бренды

FAZUA RIDE 50 TRAIL/STREET, Оригинальное руководство пользователя

Результаты поиска

Содержание RIDE 50 TRAIL/STREET

Отзывы:

Похожие инструкции для RIDE 50 TRAIL/STREET

Бренды по названию

Популярные бренды