background image

Freigabeversion

US-English | Original instructions

54

Support level “River”

•  The LEDs on the indicator 

[C.5]

 on the REMOTE light up blue.

•  You ride with reliable support for most applications.

Support level “Rocket”

•  The LEDs on the indicator 

[C.5]

 on the REMOTE light up pink.

•  You ride with maximum support for very demanding trips.

OVERVIEW TABLE “SUPPORT LEVELS

Support level

Color

Max. motor power

None

white

No support

Breeze

green

Max. configuration 300 W

River

blue

Max. configuration 300 W

Rocket

pink

Max. configuration 300 W

The above values for the maximum motor power in the support levels 

“Breeze”, “River” and “Rocket” correspond to the maximum possible 

setting. The “actual” maximum motor power in the three support 

levels is set by your e-bike manufacturer according to the model of 

your e-bike, i.e. the values for your e-bike may vary from the values  

specified above.
You can check and individually adjust the maximum motor power using 

the FAZUA Toolbox or the FAZUA app.

 See in Chapter 6.2 “FAZUA app” for more information on the FAZUA app.

24.3.1  Attack function

In addition to the “regular” support levels, which you can use at any time*, the 

drive system has an additional function: The Attack function allows you to ride 

with a (higher) maximum motor power of 350 watts for a short time to momen-

tarily give you an extra push.
The duration of the extra push depends on the situation in which you activate the 

Attack function:
•  If you activate the Attack function

 from a standstill

, you receive an extra push 

for 

4 seconds

.

•  If you activate the Attack function 

while already riding

, you receive an extra 

push for 

12 seconds

.

*  depending on the charge level of the BATTERY.

Содержание RIDE 50 TRAIL/STREET





































































Отзывы: