FAZUA RIDE 50 TRAIL/STREET Скачать руководство пользователя страница 13

Страница: 13 / 68

Freigabeversion

Original instructions | US-English

3.4 Important safety instructions

READ AND KEEP ALL IMPORTANT

SAFETY INSTRUCTIONS!

The following important safety instructions must always be observed when using

and handling the drive system.

DANGER

Dangers for users of e-bikes!

Basically there are specific dangers for the users of e-bikes,

e. g. danger of accidents when riding in road traffic. Dangers arising

from handling the corresponding e-bike model in which the drive

system is installed are dealt with in the separate instructions of the

e-bike manufacturer. Depending on your country or location, there

may also be additional legal requirements that you must observe

when using your e-bike. If you do not fully inform yourself about

existing dangers before using your e-bike equipped with the drive

system, there is an increased risk of accident and injury.

►

Read and follow the manufacturer's instructions for your e-bike.

►

Find out about and observe any applicable national regulations

regarding e-bikes.

DANGER

Batteries may explode!

Using unsuitable batteries or handling the BATTERY improperly may

cause the battery to explode.

►

Always use an original FAZUA BATTERY that is approved by the

e-bike manufacturer.

►

Never use a damaged BATTERY and never attempt to charge a

damaged BATTERY!

►

Never open the BATTERY! Attempting to open a battery increases

the risk of explosion!

►

Keep the BATTERY away from heat (e.g. strong sunlight), open fire

or water or other liquids.

Содержание RIDE 50 TRAIL/STREET




































































Результаты поиска

Содержание RIDE 50 TRAIL/STREET

Отзывы:

Похожие инструкции для RIDE 50 TRAIL/STREET

Бренды по названию

Популярные бренды

FAZUA RIDE 50 TRAIL/STREET, Оригинальное руководство пользователя

Результаты поиска

Содержание RIDE 50 TRAIL/STREET

Отзывы:

Похожие инструкции для RIDE 50 TRAIL/STREET

Бренды по названию

Популярные бренды