FAZUA RIDE 50 TRAIL/STREET Скачать руководство пользователя страница 59

Страница: 59 / 68

Freigabeversion

Original instructions | US-English

A.4

D.2

D.1

The BATTERY is designed so that it can only be inserted into the battery holder

when correctly aligned. So if you have problems inserting the BATTERY into the

battery holder, it may be because you have not aligned the BATTERY correctly.
In this case, first check that the BATTERY is aligned correctly and attempt to

insert it again.
If the BATTERY cannot be inserted into the battery holder despite correct

alignment, this may indicate that one of the components is damaged.
Do not use the drive system if the BATTERY cannot be inserted into the battery

holder but contact an authorized specialist.

3. Carefully insert the BATTERY as far as possible into the battery holder of the

DRIVEPACK.
If you have correctly inserted the DRIVEPACK all the way into the battery holder,

the push button on the BATTERY slides into the corresponding opening on the

DRIVEPACK and locks the BATTERY in position. When the push button on the

BATTERY engages in the opening on the DRIVEPACK, you will hear an audible click.

D.1

If the BATTERY does not lock in position, pull it out again and check that there

is no dirt inside the DRIVEPACK preventing it from being inserted, and attempt

to insert the BATTERY again. Do not use the drive system if the BATTERY cannot

be locked but contact an authorized specialist to have the fault rectified.

Содержание RIDE 50 TRAIL/STREET




































































Результаты поиска

Содержание RIDE 50 TRAIL/STREET

Отзывы:

Похожие инструкции для RIDE 50 TRAIL/STREET

Бренды по названию

Популярные бренды

FAZUA RIDE 50 TRAIL/STREET, Оригинальное руководство пользователя

Результаты поиска

Содержание RIDE 50 TRAIL/STREET

Отзывы:

Похожие инструкции для RIDE 50 TRAIL/STREET

Бренды по названию

Популярные бренды