FAZUA RIDE 50 TRAIL/STREET Скачать руководство пользователя страница 58

Страница: 58 / 68

Freigabeversion

US-English | Original instructions

27 USING THE BATTERY

27.1 Checking and switching on the BATTERY

DANGER

Risk of explosion and fire!

A damaged or dirty battery may explode and/or cause a fire.

►

Never insert a damaged BATTERY into the DRIVEPACK.

►

Check the BATTERY for visible damage, such as cracks or burn

marks, before each insertion.

►

Make sure that the interfaces on the BATTERY are free of dirt

before using it.

You can check the charge level of the BATTERY at any time by pressing

the on/off button

[D.5]

once: The number of illuminated LEDs on the

charge level indicator

[D.4]

indicates the charge level. Each illumi-

nated LED corresponds to 20 % of the total charging capacity. When

the BATTERY is fully charged, all 5 LEDs light up.

1. Check the BATTERY for visible damage (visual

check).

2. Press the on/off button

[D.5]

on the BATTERY

once to turn on the BATTERY:
The LEDs on the charge level indicator

[D.4]

next to the on/off button light up, indicating the

current charge level of the BATTERY.
If none of the LEDs on the charge level indicator light up after pressing the on/

off button, this indicates that the BATTERY is damaged.
If this happens, do not insert the BATTERY into the DRIVEPACK but contact an

authorized specialist.

27.2 Inserting the BATTERY in the DRIVEPACK

1. Hold the DRIVEPACK with one hand and the BATTERY with the other.
2. Position the BATTERY with the interface

[D.2]

facing forward toward the empty

battery holder

[A.4]

and align it so that the battery lock push button

[D.1]

is on

the same side as the corresponding opening on the DRIVEPACK.

D.5

D.4

Содержание RIDE 50 TRAIL/STREET




































































Результаты поиска

Содержание RIDE 50 TRAIL/STREET

Отзывы:

Похожие инструкции для RIDE 50 TRAIL/STREET

Бренды по названию

Популярные бренды

FAZUA RIDE 50 TRAIL/STREET, Оригинальное руководство пользователя

Результаты поиска

Содержание RIDE 50 TRAIL/STREET

Отзывы:

Похожие инструкции для RIDE 50 TRAIL/STREET

Бренды по названию

Популярные бренды