Freigabeversion
Original instructions | US-English
25
• the selected route and the weather conditions;
• the weight of driver and e-bike (total weight);
• the condition and age of the BATTERY.
The following therefore applies as a matter of principle:
→
Familiarize yourself with your e-bike step by step and away from roads and
heavy traffic.
→
Test the maximum range of your e-bike under various external conditions
before planning longer trips. An exact statement about the range of your
system is neither possible before nor during a trip.
Storage and operating temperatures
→
Observe the operating and storage temperatures for the components of the
drive system and for the components of your e-bike - especially for the BATTERY,
as it can be damaged by extreme temperatures.
→
For more detailed information on operating and storage temperatures, refer to the
technical data of the individual components on Page 41, Page 46, Page 50, Page 57 and
Page 64 as well as in Chapter 5 “Storage and transport”.
DANGER
If you do not handle the BATTERY properly, the BATTERY may explode!
4.4 Switching on the drive system after standstill
Your e-bike will come to a standstill as soon as it is switched off.
After 15 minutes of standstill, the drive system (not the BATTERY!) switches off
automatically.
→
Press the center button on the REMOTE once briefly to turn on the drive system
again.
The BATTERY switches off automatically after 8 hours of standstill or after 3 hours
of standstill if the charge level of the BATTERY is below 30% (provided that no
button/touch sensor is pressed during this time).
→
To switch on (“wake up”) the BATTERY again, press:
the center button on the REMOTE once briefly.
or
the on/off button on the BATTERY once.
→
After waking the BATTERY, press the center button on the REMOTE (again) once
briefly to turn on the drive system again.
