FAZUA RIDE 50 TRAIL/STREET Скачать руководство пользователя

Страница: 50 / 68

Freigabeversion

US-English | Original instructions

22 TECHNICAL DATA

TECHNICAL DATA OF THE REMOTE

Model designations

→

REMOTE FX
REMOTE BX
REMOTE RX

Degree of protection

(in assembled condition)

→

IP54

Weight, approx.

→

0.106 lbs (0.048 kg)

Operating temperature

→

23 °F to 104 °F (-5 °C to +40 °C)

(ambient temperature)

Storage temperature (< 1 month)

→

5 °F to 140 °F (-15 °C to +60 °C)

Storage temperature (> 1 month)

→

5 °F to 77 °F (-15 °C to +25 °C)

23 INDICATORS ON THE REMOTE

The LED display

[C.5]

[C.6]

on the REMOTE consists of 5 LEDs.

• All five LEDs

[C.5]

together serve as an indicator for the charge level and the

preset pedal support level.

• The upper of the five LEDs

[C.6]

also serves as a status indicator, informing you

about the status of your e-bike.

23.1 Status indicator

The status indicator

[C.6]

indicates a status change or a pending fault. If no fault

is detected, the status indicator LED will act as one of the five LEDs

[C.6]

to indi-

cate the charge level or preset support level.
Depending on which status is displayed, the LED of the status indicator lights up

in different colors.
The status indicator

[C.6]

•

flashes green or blue*= “Ready for operation”

After successful installation of the Drivepack in the e-bike, the status indicator

flashes green or blue briefly to indicate that you can now switch on the drive

system using the REMOTE.

* The color for the “Ready for operation” status is either green or blue, depending on the model.

Содержание RIDE 50 TRAIL/STREET




































































Результаты поиска

Содержание RIDE 50 TRAIL/STREET

Отзывы:

Похожие инструкции для RIDE 50 TRAIL/STREET

Бренды по названию

Популярные бренды

FAZUA RIDE 50 TRAIL/STREET, Оригинальное руководство пользователя

Результаты поиска

Содержание RIDE 50 TRAIL/STREET

Отзывы:

Похожие инструкции для RIDE 50 TRAIL/STREET

Бренды по названию

Популярные бренды