background image

GB

IRE

AFTER SALES SUPPORT

[email protected]

Model: 

JY-7023 / JY-401P / 22203/ PO30000087

Product code: 

93146

05/2016

00800 / 68546854

GB IRE

B   

Product contents

1

Front light, 1x

4

Tail light, 1x

8

Bracket for the front light, 1x

9

Bracket for the tail light, 1x

10

AAA battery for the front/tail light, 4x each

General information

Reading and storing the user manual

This user manual is part of this bicycle light set. The bicycle 

light set comprises the front and tail light. The user manual 
contains important information on how to use the bicycle 
light set.
For improved readability, the

•  bicycle light set will be referred to only as “bicycle 

lights” and

• the individual lights will be referred to as “front light” 

and “tail light” or “bicycle light”

below.
Before using the bicycle lights, read the user manual care-
fully. This particularly applies for the safety notes. Failure 
to observe this user manual may result in severe injury or 
damage to the bicycle lights.

The user manual is based on the standards and rules in 

force in the European Union. When abroad, you must also 
observe country-specific guidelines and laws!
Keep the user manual for future use. If you pass the bicycle 
lights on to third parties, please be absolutely sure to 

 include this user manual.

Explanation of symbols

The following symbols and signal words are used in this 

user manual, on the bicycle lights or on the packaging.

 WARNING!

This signal word designates a hazard with moderate risk, 

which may result in death or severe injury if not avoided.

 CAUTION!

This signal word designates hazard with low risk, which 

may result in minor or moderate injury if not avoided.

NOTICE!

This signal word warns against potential damage to 

property.

This symbol provides you with useful 

supplementary information on assembly 
or operation.

Declaration of conformity (see chapter 

“Declaration of conformity”): Products 

marked with this symbol meet all applica-
ble Community regulations for the Euro-
pean Economic Area.

Safety

Proper use

The bicycle lights are only designed for use as bicycle 

lighting. 
Only use the bicycle lights as described in this user manual. 

Any other use will be deemed as not in accordance with 

the instructions and may lead to damage of property or 
injury to persons.

The manufacturer or vendor accepts no liability for 

damage caused by improper or incorrect use.

Safety notes

 WARNING!

Danger of suffocation!

If children swallow packaging or small parts, 

they may choke.

 

− Keep packaging parts and small parts 

away from children.

 WARNING!

Danger of explosion! 

If you dispose of batteries in an open fire, they 

may explode and emit toxic vapours.

 

− Do not throw batteries in an open fire.

 

− Dispose of batteries at your collection 

point.

 WARNING!

Risk of poisoning! 

If children swallow damaged batteries, the 

batteries could leak and result in poisoning 

or even death.

 

− Store the batteries in an area that is not 

accessible for children.

 

− If it is no longer possible to securely close 

a battery compartment, dispose of the 

respective bicycle light as described in the 

chapter “Disposal”.

 

− If you suspect that a battery has been 

swallowed or otherwise incorporated, 

promptly consult a physician.

 CAUTION!

Risk of injury!

Using different types of batteries for the 

bicycle lights may increase the risk of the 

batteries leaking. Contact with damaged 

and leaky batteries may result in injury or 

chemical burns.

 

− Do not touch leaky batteries. If you do 

happen to come into contact with battery 

acid, wash the affected area thoroughly 

with plenty of clean water.

 

− To prevent batteries from leaking, do not 

charge them, do not disassemble them and 

do not short circuit them.

 

− Remove the batteries from the bicycle 

lights as soon as they are empty.

 

− Only use batteries with the same output 

(see chapter “Technical data”).

 

− Do not use old and new batteries together.

 CAUTION!

Risk of injury!

The front light exceeds the limits for the “ex-

empt group” according to DIN EN 62471. The 

light emitted by bicycle lights contains blue 

light. Blue light wavelengths from 400 nm 

to 780 nm pose a hazard for the retina. The 

limit of the “exempt group” is adhered to 

from 1.2 m.

 

− Avoid looking directly into the light for pro-

longed periods of time during operation.

 

− Wear suitable eye protection or shield 

your eyes when looking directly into the 

light.

Assembly

Quick release bracket

1. Turn the screw 

12

 counterclockwise and out of the

quick release bracket (see 

fig. B

).

2. Place the quick release bracket for the front light on the

handlebar of the bicycle and tighten it with the screw.

3. Place the quick release bracket for the tail light on the

seat post of the bicycle and tighten it with the screw.
If necessary, use the rubber strips 

13

 to ensure a 

secure fit of the quick release bracket (see 

fig. B

).

You have successfully mounted the quick release 

bracket and can push the bicycle lights onto the quick 
release bracket.

Bicycle lights

1. Push the bicycle lights onto the quick release bracket 

from the front until they lock into place 

(see 

fig. C

).

2. Adjust the bicycle light so that the centre of the light 

cone is just half as high as the upper edge of the front
light at a distance of 5 m (see 

fig. D

).

Removal

Quick release bracket

In order to remove the quick release bracket, reverse the 
steps.

Bicycle lights

Push the lever on the quick release bracket to remove the 
bicycle light.

Handling

Turning the bicycle lights on and off

Push the On/Off buttons 

2

 and 

6

 to switch the bicycle 

lights on or off (see 

fig. A

).

Pushing the On/Off button for the front 
light twice enables you to reduce its 
brightness.

Changing the battery

Change the batteries if the battery control light 

3

 or 

7

is illuminated (see 

fig. A

). This is the only way to ensure 

permanent road safety.

Front light

1. Turn the cover lid 

11

counterclockwise to open 
the battery compartment.

2. Insert the batteries in the

battery compartment. 
Make sure the polarity is 
correct.

3. Gently push the cover lid 

onto the battery compart-
ment opening.

4. Turn the cover lid clock-

wise to close the battery
compartment.

D   

C   

13

12

5m

100 %

50 %

“PRESS ”

Click

“PRESS ”

A   

11

“PRESS ”

2

3

5

6

7

1

4

8

9

10

Spend a little

 Live a lot.

User

 

Manual

ID: #05007

m

yha

nsecontrol.

co

m

M

A

N

UA

DE

VELO

PED IN

GE

RM

A

N

Y

User-friendly

Manual

BICYCLE LIGHT SET

PRODUCED IN CHINA FOR:

ALDI STORES LTD. PO BOX 26, 

ATHERSTONE
WARWICKSHIRE, CV9 2SH

ALDI STORES (IRELAND) LTD.
PO BOX 726, NAAS, CO. KILDARE.
Visit us at www.aldi.com

YEARS

WARRANTY

GB
IRE

[email protected]

GB IRE

ZUR FREIGABE V06

Отзывы: