Fayat DYNAPAC CX8, Инструкция по эксплуатации, Страница: 78 / 180

Operation
4812165801.pdf 2024-04-22
Operator position
1
4
5
Fig. Operator position
1. Seat belt
4. Rubber element
5. Anti-slip
Always wear the seat belt (1) provided and wear a
protective helmet.
Replace the seat belt (1) if it shows signs of
wear or has been subjected to high levels of
force. Replace the seat belt (1) if it shows signs of
wear or has been subjected to high levels of
force.
Inspect the Cab for damages. Contact your
supervisor for further actions if damages are
detected. Inspect the Cab for damages. Contact your
supervisor for further actions if damages are
detected.
Check that the rubber elements (4) on the
platform are intact. Worn elements will reduce
comfort. Check that the rubber elements (4) on the
platform are intact. Worn elements will reduce
comfort.
Ensure that the anti-slip (5) on the platform is in
good condition. Replace where anti-slip friction
is poor. Ensure that the anti-slip (5) on the platform is in
good condition. Replace where anti-slip friction
is poor.
Make sure that the cab door is closed when in
motion. Make sure that the cab door is closed when in
motion.
View
Before starting, make sure that the view forwards and
backwards is unobstructed.
All cab windows should be clean and the rear view
mirrors should be correctly adjusted.
Sight camera, front/rear (Optional 360°)
The machine is equipped with cameras to improve
visibility in the vicinity of the machine.
Make sure the camera lenses are clean and the
system is working before using the machine.
If the system does not work, contact supervisors and
take precautions in case the machine needs to be
moved.
Additional instructions for the cameras can be found in the
manufacturer's manual. (Supplied in the machine with the other
documentation)
66