Fayat DYNAPAC CX8, Инструкция по эксплуатации, Страница: 172 / 180

Maintenance - Every 2000h
4812165801.pdf 2024-04-22
Seat bearing - Lubrication
Fig. Seat bearing
1. Lubricant nipple
1
Remove the cover on the front of the seat frame to
access the lubricant nipple (1). Lubricate the driver
seat slew bearing with three strokes of a
hand-operated grease gun.
Grease the seat slide rails as well.
If the seat starts to be stiff when adjusting, it
should be lubricated more often than specified
here. If the seat starts to be stiff when adjusting, it
should be lubricated more often than specified
here.
Hydraulic reservoir cap - Check
Fig. Left side of machine
1. Reservoir cap
1
Unscrew and make sure that the reservoir cap is not
clogged. Air must have unobstructed passage through
the cap in both directions.
If passage in either direction is blocked, clean the filter
with a little diesel oil and blow through with
compressed air until the block is removed, or replace
the cap with a new one.
Wear protective goggles when working with
compressed air. Wear protective goggles when working with
compressed air.
160