Fayat DYNAPAC CX8, Инструкция по эксплуатации, Страница: 152 / 180

Maintenance - Every 500h
4812165801.pdf 2024-04-22
Drum - oil level
Inspection - filling
Fig. Drum, vibration side
1. Filler plug
2. Sight glass
2
1
Position the roller with the filler plug (1) at the highest
point in its rotation.
Wipe clean around the sight glass (2).
Make sure that the oil level reaches half way in the
sight glass. Top off with fresh oil if the level is low. Use
oil as specified in the lubricants specification.
Inspection and refilling is only necessary to make on
one side of the drum.
When removing the filler plug, wipe any metal
accumulated on the plug magnet off.
Refit the plugs and check that they are tight by driving
the roller and then rechecking.
Inspect both front and rear drum.
Rubber elements and attachment screws
Check
Fig. Drum, vibration side
1. Rubber element
2. Attachment screws
2
1
Check all rubber elements (1). Replace all elements if
25% or more than 25% of the number on one side of
the drum have cracks deeper than 10-15 mm (0.4-0.6
in).
Check using a knife blade or pointed object.
Check also that the attachment screws (2) are
tightened.
140