Fayat DYNAPAC CX8, Инструкция по эксплуатации, Страница: 107 / 180

Operation
4812165801.pdf 2024-04-22
Braking
2
3
1
Fig. Control panel
1. Vibration On/Off switch
2. Forward/Reverse lever
3. Parking brake
Service brake
Press the switch (1) to switch off the vibration if they
are on.
Move the forward/reverse lever (2) to the neutral
position to stop the roller.
Always activate the parking brake (3), before leaving
the operator platform.
If the forward/reverse lever is moved quickly (forwards
or backwards) toward/past neutral, the system
switches to a rapid braking Mode and
the machine stops.
Activate normal driving Mode again by moving the
forward/reverse lever back to neutral.
Reserve brake
2
1
Fig. Control panel
1. Emergency stop
2. Parking brake
Braking is normally activated using the
forward/reverse lever. The hydrostatic transmission
retards and slows the roller when the lever is moved
towards the neutral position.
In addition, there is a disc brake in the drive motors
that acts as a reserve brake when operating, and as a
parking brake when stationary (then activated with the
parking brake button (2)).
For reserve braking, press the parking brake
button (2), hold the steering wheel firmly and be
prepared for a sudden stop. For reserve braking, press the parking brake
button (2), hold the steering wheel firmly and be
prepared for a sudden stop.
95