Fayat DYNAPAC CX8, Инструкция по эксплуатации, Страница: 25 / 180

Special instructions
4812165801.pdf 2024-04-22
Fire extinguisher
Fig. Cab
1. Fire extinguisher
1
A fire extinguisher can be ordered as an option.
Though, different standards are used around the world.
If not using the original fire extinguisher, place your
extinguisher as in the picture. A 4 kg extinguisher is
recommended.
Follow the installation instructions supplied with the
fire extinguisher and make sure that the location does
not create any risks.
Roll Over Protective Structure (ROPS), ROPS
approved cab
If the machine is fitted with a Roll Over
Protective Structure (ROPS, or ROPS approved
cab) never carry out any welding or drilling in
the structure or cab. If the machine is fitted with a Roll Over
Protective Structure (ROPS, or ROPS approved
cab) never carry out any welding or drilling in
the structure or cab.
Never attempt to repair a damaged ROPS
structure or ROPS structure in cab. These must
be replaced with new ROPS structure or new
cab. Never attempt to repair a damaged ROPS
structure or ROPS structure in cab. These must
be replaced with new ROPS structure or new
cab.
Welding
When carrying out welding on the machine, the
battery must be disconnected and the
electronics disconnected from the electrical
system. When carrying out welding on the machine, the
battery must be disconnected and the
electronics disconnected from the electrical
system.
If possible, remove the part(s) to be welded
from the machine. If possible, remove the part(s) to be welded
from the machine.
Battery handling
When removing batteries,
always disconnect the negative cable first. When removing batteries,
always disconnect the negative cable first.
When fitting batteries,
always connect the positive cable first. When fitting batteries,
always connect the positive cable first.
13