Fayat DYNAPAC CX8 Скачать руководство пользователя страница 103 | Manualshive

Страница: 103 / 180

Fayat DYNAPAC CX8 Скачать руководство пользователя страница 103

Operation

4812165801.pdf

2024-04-22

Preparations before adjustment / emptying.

The machine should be placed on a level surface
with the engine switched off and brake applied.

The machine should be placed on a level surface
with the engine switched off and brake applied.

Emptying

Empty the spreader by setting it in transport mode
over the required area and by fully opening the lever
on the left-hand side.

Washing the spreader

When corrosive material has been used the spreader
must be flushed clean with water.
This should also be done when the spreader is not to
be used for a long period.

Adjusting the chain 1

Loosen the four bolts for the bearing housing and turn
it to the correct position, where the chain has a
clearance of approx. 10 mm. Tighten the bolts.

91

«
...
101
102
103
104
105
...
»

Содержание DYNAPAC CX8





















































































































































































Отзывы:

Нет отзывов