Fayat Dynapac CC1200 VI, Инструкция по эксплуатации, Страница: 72 / 201

Operation
4812313735.pdf 2018-12-28
Vibration
Manual/Automatic vibration
In automatic mode, the vibration is activated when the
pre-set speed is reached, provided that one or both
drums are selected with the help of the buttons on the
control lever.
(See the Display chapter to active).
Vibration is automatically deactivated when the lowest
pre-set speed is reached.
Deactivation is performed by pressing one or both of
the buttons (1 and 2) again.
If the machine is in Transport mode and the
buttons on the forward/reverse lever are pressed,
the Working mode symbol is shown on the
display.
The three LEDs on the Working position button
flash.
If the machine is in Transport mode and the
buttons on the forward/reverse lever are pressed,
the Working mode symbol is shown on the
display.
The three LEDs on the Working position button
flash.
58
20
Fig. Instrument panel
20. Switch, Vibration selector
In Working mode/Vibration (20) (LED LEFT lit) you
can select, manually, which drum is to vibrate with the
button on the forward/reverse lever.
For Standard machine:
Button (1) activates vibration on on both the drums.
For machines equipped with options:
Button (1) activates vibration on the front drum.
Button (2) activates vibration on the rear drum.
Both buttons activate vibration on on both the drums.
The machine is
equipped with
options
Standard equipped
machine
Fig. Right Forward/Reverse lever
1
2
1