manualshive.com logo in svg

Fayat Dynapac CC1200 VI, Инструкция по эксплуатации, Страница: 156 / 201

Поделиться
Скачать
Fayat Dynapac CC1200 VI Скачать руководство пользователя страница 156

Maintenance - 1000h

1

2

2

3

Fig. Engine compartment -

D1703-M-DI-E4B (T4f)

     1. Pre-filter

     2. Hose clamps

     3. Fuel pump

D1703

The prefilter is located to the left of the fuel pump in

the engine compartment.
Loosen the hose clamps (2) using a screwdriver.
Remove the pre-filter (1) and hand in to a waste

disposal site. This is a disposable filter and cannot be

cleaned.
Fit a new pre-filter and tighten the hose clamps.
Start the engine and check that the pre-filter is tight.

142

4812313735.pdf

2018-12-28

Ensure good ventilation (air extraction) if the

diesel engine is run indoors. Risk of carbon

monoxide poisoning.

Ensure good ventilation (air extraction) if the

diesel engine is run indoors. Risk of carbon

monoxide poisoning.

2

2

3

Fig. Engine compartment -

D1703-M-IDI-E3 (T3)

     1. Pre-filter

     2. Hose clamps

     3. Fuel pump

1

Activate the parking brake.

Switch off the engine and open the engine hood.

Place a container underneath to collect fuel that

runs out when the filter is released.

Place a container underneath to collect fuel that

runs out when the filter is released.

Replacing the pre-filter

Содержание Dynapac CC1200 VI










































































































































































































Отзывы:

Нет отзывов