manualshive.com logo in svg

Fayat Dynapac CC1200 VI, Инструкция по эксплуатации, Страница: 146 / 201

Поделиться
Скачать
Fayat Dynapac CC1200 VI Скачать руководство пользователя страница 146

Maintenance - 500h

4812313735.pdf

2018-12-28

1

Fig. Fuel prefilter

1. Drain plug

If water or contaminates accumulate in the fuel filter’s

water separator, an indication will be shown on the

display.
If this should happen during operation, drain from the

draining plug. (1).

132

Fuel tank - Cleaning

Fig.  Fuel tank
     1. Fuel tank

1

It is easiest to clean the tank when it is almost empty.

Pump out any bottom sediment using a suitable
pump, such as an oil drain pump. Save the oil in
a container and dispose of it in an approved
manner.

Pump out any bottom sediment using a suitable
pump, such as an oil drain pump. Save the oil in
a container and dispose of it in an approved
manner.

Keep in mind fire risk when handling fuel.

Keep in mind fire risk when handling fuel.

The fuel tank is made of plastic (polyethylene)
and is recyclable.

The fuel tank is made of plastic (polyethylene)
and is recyclable.

Fuel filter’s water separator - Draining
(on machines equipped with this)

Содержание Dynapac CC1200 VI










































































































































































































Отзывы:

Нет отзывов