Fayat Dynapac CC1200 VI, Инструкция по эксплуатации, Страница: 157 / 201

Maintenance - 1000h
4812313735.pdf 2018-12-28
Wear protective goggles when working with
compressed air or high-pressure water jets.
Checking of EGR cooler
Contact your local Kubota representative for this
service
143
Fuel tank - Cleaning
Fig. Fuel tank
1. Fuel tank
1
It is easiest to clean the tank when it is almost empty.
Pump out any bottom sediment using a suitable
pump, such as an oil drain pump. Save the oil in
a container and dispose of it in an approved
manner. Pump out any bottom sediment using a suitable
pump, such as an oil drain pump. Save the oil in
a container and dispose of it in an approved
manner.
Keep in mind fire risk when handling fuel. Keep in mind fire risk when handling fuel.
The fuel tank is made of plastic (polyethylene)
and is recyclable. The fuel tank is made of plastic (polyethylene)
and is recyclable.
Coolers
Checking - Cleaning
Fig. Engine compartment
1. Water cooler
2. Hydraulic fluid cooler
2
1
Make sure that the air flow through the coolers (1) and
(2) is unobstructed. Dirty coolers are blown clean with
compressed air or washed clean using a
high-pressure water cleaner.
Blow air or direct water through the cooler in the
opposite direction to that of the cooling air.
Take care when using a high-pressure water jet.
Do not hold the nozzle too near the cooler. Take care when using a high-pressure water jet.
Do not hold the nozzle too near the cooler.
Wear protective goggles when working with
compressed air or high-pressure water jets.