Fayat Dynapac CC1200 VI Скачать руководство пользователя страница 26

Страница: 26 / 201

Special instructions

4812313735.pdf

2018-12-28

Do not spray with high-pressure cleaner directly onto

gaskets and bearing spacings in steering hitch and

drum, and electronics.

Never aim the water jet directly at the fuel tank
cap, or into exhaust pipe. This is particularly
important when using a high-pressure cleaner.

Fire fighting

If the machine catches fire, use an ABC-class powder
fire extinguisher.

A BE-class carbon dioxide fire extinguisher can also
be used.

Roll Over Protective Structure (ROPS)

If the machine is fitted with a Roll Over
Protective Structure (ROPS) never carry out any
welding or drilling in the structure or cab.

Never attempt to repair a damaged ROPS
structure or cab. These must be replaced with
new ROPS structure or cabs.

Battery handling

When removing batteries, always disconnect the
negative cable first.

When fitting batteries, always connect the
positive cable first.

Dispose of old batteries in an environmentally
friendly way. Batteries contain toxic lead.

Do not use a quick-charger for charging the
battery. This may shorten battery life.

Содержание Dynapac CC1200 VI










































































































































































































Результаты поиска

Содержание Dynapac CC1200 VI

Отзывы:

Fayat Dynapac CC1200 VI, Инструкция по эксплуатации, Страница: 26 / 201

Результаты поиска

Содержание Dynapac CC1200 VI

Отзывы: