manualshive.com logo in svg

Fayat Dynapac CC1200 VI, Инструкция по эксплуатации, Страница: 114 / 201

Поделиться
Скачать
Fayat Dynapac CC1200 VI Скачать руководство пользователя страница 114

Maintenance, 10h

1

2

Fig. Diesel engine - D1703 (T4f)

     1. Dipstick

     2. Filler plug

100

4812313735.pdf

2018-12-28

Diesel engine  Check oil level

Ensure that the engine cover is fully open when
work is carried out under the cover.

Ensure that the engine cover is fully open when
work is carried out under the cover.

Fig. Engine
     1. Dipstick
     2. Filler cap

1

2

Open the engine cover lock and lower the engine
cover forwards.

Check the oil level using the dipstick (1). The level
should be between the marks. If the level is near the
lower mark, top off with fresh engine oil via the filler
cap (2). See under the heading lubricants for the
correct oil grade.

Never overfill with oil, as this can damage the
engine.

Never overfill with oil, as this can damage the
engine.

Содержание Dynapac CC1200 VI










































































































































































































Отзывы:

Нет отзывов