Fayat Dynapac CC1200 VI Скачать руководство пользователя страница 35

Страница: 35 / 201

Technical specifications

4812313735.pdf

2018-12-28

Max 20° or 36%

This angle has been measured on a hard, flat surface

with the machine stationary.
The steering angle was zero, the vibration was

switched OFF and all tanks were full.
Always take into consideration that loose ground,

steering the machine, vibration on, machine speed

across the ground and raising the center of gravity can

all cause the machine to topple at smaller slope

angles than those specified here.

ROPS-bolts which are to be torque tightened
must be dry.

ROPS - bolts

Bolt dimensions :

M16 (PN 4700902889)

Bolt dimensions :

M16 (PN 4700902889)

Strength class :

8.8

Strength class :

8.8

Tightening torque :

190 Nm
(Dacrometbehandlade)

Tightening torque :

190 Nm
(Dacrometbehandlade)

Hydraulic system

Opening pressure (Absolute pressure)

MPa

Opening pressure (Absolute pressure)

MPa

Drive system

35,0

Drive system

35,0

Supply system

2.0

Supply system

2.0

Vibration system

21,0

Vibration system

21,0

Control systems

18,0

Control systems

18,0

Brake release

1.2 - 3.0

Brake release

1.2 - 3.0

Slopes

Содержание Dynapac CC1200 VI










































































































































































































Результаты поиска

Содержание Dynapac CC1200 VI

Отзывы:

Fayat Dynapac CC1200 VI, Инструкция по эксплуатации, Страница: 35 / 201

Результаты поиска

Содержание Dynapac CC1200 VI

Отзывы: