manualshive.com logo in svg

Fayat Dynapac CC1200 VI, Инструкция по эксплуатации, Страница: 15 / 201

Поделиться
Скачать
Fayat Dynapac CC1200 VI Скачать руководство пользователя страница 15

Introduction

4812313735.pdf

2018-12-28

1

Introduction

The machine

Dynapac CC1200 VI are two self-propelled

vibratory tandem rollers in the 2 metric tonnes class

featuring 1200 mm wide drums. The machines

are equipped with drive, brakes, and vibration on both

drums.

Intended use

The rollers are mainly intended for compaction of thin

layers and soft asphalt masses for minor contruction

work, such as small streets, pavements, cycle paths

and garage drives. It has sufficient capacity to follow a

small asphalt paver.

Warning symbols

WARNING ! Marks a danger or a hazardous

procedure that can result in life threatening or

serious injury if the warning is ignored.

WARNING ! Marks a danger or a hazardous

procedure that can result in life threatening or

serious injury if the warning is ignored.

CAUTION ! Marks a danger or hazardous

procedure that can result in damage to the

machine or property if the warning is ignored.

CAUTION ! Marks a danger or hazardous

procedure that can result in damage to the

machine or property if the warning is ignored.

Safety information

It is recommended to at least train operators in

handling and daily maintenance of the machine

in accordance with the instruction manual.

It is recommended to at least train operators in

handling and daily maintenance of the machine

in accordance with the instruction manual.

Passengers are not allowed on the machine, and

you must sit in the seat when operating the

machine.

Passengers are not allowed on the machine, and

you must sit in the seat when operating the

machine.

The safety manual supplied with the machine

must be read by all roller operators. Always

follow the safety instructions. Do not remove

the manual from the machine.

The safety manual supplied with the machine

must be read by all roller operators. Always

follow the safety instructions. Do not remove

the manual from the machine.

We recommend that the operator reads the

safety instructions in this manual carefully.

Always follow the safety instructions. Ensure

that this manual is always easily accessible.

We recommend that the operator reads the

safety instructions in this manual carefully.

Always follow the safety instructions. Ensure

that this manual is always easily accessible.

Содержание Dynapac CC1200 VI










































































































































































































Отзывы:

Нет отзывов