manualshive.com logo in svg

Fayat Dynapac CC1200 VI, Инструкция по эксплуатации, Страница: 20 / 201

Поделиться
Скачать
Fayat Dynapac CC1200 VI Скачать руководство пользователя страница 20

Safety - General instructions

4812313735.pdf

2018-12-28

16. Hearing protection is recommended if the noise level exceeds 80 dB(A). The

noise level can vary depending on the equipment on the machine and the

surface the machine is being used on.

16. Hearing protection is recommended if the noise level exceeds 80 dB(A). The

noise level can vary depending on the equipment on the machine and the

surface the machine is being used on.

17. Do not make any changes or modifications to the roller that could affect

safety. Changes are only to be made after written approval has been given

by Dynapac.

17. Do not make any changes or modifications to the roller that could affect

safety. Changes are only to be made after written approval has been given

by Dynapac.

18. Avoid using the roller before the hydraulic fluid has reached its normal

working temperature. Braking distances can be longer than normal when the

fluid is cold. See instructions in the STOP section.

18. Avoid using the roller before the hydraulic fluid has reached its normal

working temperature. Braking distances can be longer than normal when the

fluid is cold. See instructions in the STOP section.

19. For your own protection always wear:

- helmet

- working boots with steel toecaps

- ear protectors

- reflecting clothing/high visibility jacket

- working gloves

19. For your own protection always wear:

- helmet

- working boots with steel toecaps

- ear protectors

- reflecting clothing/high visibility jacket

- working gloves

6

Содержание Dynapac CC1200 VI










































































































































































































Отзывы:

Нет отзывов