manualshive.com logo in svg

Fayat Dynapac CC1200 VI, Инструкция по эксплуатации, Страница: 161 / 201

Поделиться
Скачать
Fayat Dynapac CC1200 VI Скачать руководство пользователя страница 161

Maintenance - 2000h

4812313735.pdf

2018-12-28

Maintenance - 2000h

Performed after 2000 operating hours (every two

years)

When disconnecting the battery, always

disconnect the negative cable first. When

connecting the battery, always connect the

positive cable first.

The cable shoes should be clean and well-tightened.

Corroded cable shoes should be cleaned and greased

with acid-free Vaseline.
Wipe the top of the battery.

147

Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.

Park the roller on a level surface.
The engine must be switched off and the
parking brake activated when checking or
adjusting the roller, unless otherwise specified.

Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.

Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.

Battery
- Check condition

Fig.  Battery

The battery is sealed and maintenance-free.

Make sure there is no open flame in the vicinity
when checking the electrolyte level. Explosive gas
is formed when the alternator charges the battery.

Make sure there is no open flame in the vicinity
when checking the electrolyte level. Explosive gas
is formed when the alternator charges the battery.

When disconnecting the battery, always
disconnect the negative cable first. When
connecting the battery, always connect the
positive cable first.

Содержание Dynapac CC1200 VI










































































































































































































Отзывы:

Нет отзывов