Faro Focus 3D X 130, Руководство по обучению

Страница: 309 / 340

293
LMMMMM 1M LMLMMLMML M MMMMMM MMMM
Focus
3D
X 130 and X 330 • SCENE 5.3
September 2014
LMMMMM 1M
Capturing a Detail Scan
This lesson explains the steps involved in capturing a detail scan, and
includes working with the scanner interface and planning. Capturing
detail scans can save time and ensure that enough data is captured to
meet project requirements.
Learning objectives:
• Practice the Detail with an Overview scanning strategy.
• Determine
Scan Duration
for detail scans.
• Capture an additional full scan.
OvMLvMMw
A detail scan contains only a portion of the scan area and is usually at a
higher resolution than a full scan. In some situations, you may need to
capture a detailed area or object, rather than, or in addition to, capturing
a full scan.
The advantages of capturing detail scans include:
• Files are smaller and require fewer computer resources.
• Scan Duration is shorter.
To capture a detail scan, from the Home screen, tap Parameters >
Horizontal Vertical
. This opens the
Scan Area
screen.
The Vertical Area and Horizontal Area display the angles of the outside
edges of the scan area. The outside edges of the default area, which is a
full scan, are at -60° (bottom edge), 90° (top edge), 0° (left edge), and
360° (right edge).
To capture a detail scan, change the angles to move the outside edges of
the scan area. To change the angles, use the arrows to move the edges
incrementally, or tap one of the blue degree buttons to enter numeric
values using the on-screen keyboard.