Faro Focus 3D X 130, Руководство по обучению

Страница: 288 / 340

272
MMMMMM MM MMMMM MMMMM MMMM M MM MMMMMMMMMMM
Focus
3D
X 130 and X 330 • SCENE 5.3
September 2014
9. Delete the unwanted scan data.
A. Use the PMMyLMM MMMMMMMM button to select the scan
points you want to remove.
B. Right-click in the selected area and click
DMMMMM
IMMMMM MMMMMMMMM .
C. Repeat as needed.
10. Save.
AMMLMmMMM
The orientation of the scan project is derived from the orientation of the
reference scan. To change the orientation, you can use the
Alignment
command.
The
Alignment
command allows you to select a plane or a slab and
align it with a cardinal direction or designate it as the floor or ceiling. In
SCENE, north is in the positive direction on the
y
axis and east is in the
positive direction on the x axis.
To align a scan:
1. In the
Structure
window, expand the folder structure and
select a plane.
2. Right-click, then click Alignment .
3. Click the type of alignment you want to use.
VMMMbMMMMy MMMMMMLM
As you prepare scan data for exporting, you may want to show or hide
scan elements, such as scan names and reference objects.
There are several ways to adjust the
Visibility Settings for these
elements.