Faro Focus 3D X 130, Руководство по обучению

Страница: 107 / 340

9L
LMLLMM 3M LMMMMMM MMLMMMMML
Focus
3D
X 130 and X 330 • SCENE 5.3
September 2014
LMLLMM 3M
Scanner Positions
This lesson explains the importance of scanner positions and the steps
for planning scanner positions. Positioning the scanner correctly leads to
capturing all required scan data in the most efficient manner possible.
There are several factors to consider when selecting scanner positions,
including:
• Number of scanner positions
• Distance from the object or area of interest
• Line of sight
• Angle to the object of interest
• Bisecting
• Target arrangements
The primary concern when selecting scanner positions is capturing the
object of interest.
NMmbMM Mf LMMMMMM MMLMMMMML
Each project will differ in the project requirements and constraints, and
the number of scanner positions will depend on these factors, as well as
on site and environmental conditions. With careful planning, you can
minimize the number of scanner positions needed to adequately capture
the object or area of interest.
The most important factor to consider when determining the number of
scanner positions is overlapping scan areas. Each scan area must overlap
with one or more other scan areas to ensure successful registration.
DMLMMMMM fMMm MhM ObMMMM MM AMMM Mf IMMMMMLM
The maximum allowable distance between the scanner and the object
of interest depends on the desired level of detail, time constraints, site
conditions, and other factors.
Slides 102-104
Slide 105
Slides 106-107