FARMTECH FDD 3000, Руководство пользователя

Страница: 83 / 105

Note: The Tracking Shaft Control and Fertilizer Shaft
Control have the same operating logic and the
corresponding setting must be made by considering this
situation.
C.10.2.5 Working Width
It is the value refers to the working width of your grain
drill in centimeters (cm). It is used in the calculation of
the working field of the work computer and the
corresponding value must not be changed by end user.
An incorrect entry of this value will lead to deviations in
working field.
Press the Manual Row Skipping/Confirmation (6)
button if you want to exit the settings menu.
C.10.3 Shortcut Tracking Settings Buttons
Number of tracking rounds settings can be accessed
by using the shortcut tracking settings button on the
control display without any need to enter the settings
menu.
For this, the necessary setting can be made by using first
of all the
shortcut tracking setting button + (4), then the
same button and then the next down arrow button (5). (On
the left)
Shortcut Speed
Control
Shortcut Speed
Control
Button -
C.10.4 Manual Tracking Control
The tracking system on your grain drill functions as
integrated with the inductive sensors on the markers.
Thus, the work computer follows the market movements
and executes the tracking automatically without the
need of an additional process.
Manual Control
Button
However, in cases that the marker system cannot
be used for any reason, the tracking system can
also be directed manually. For this, operator must
press the
Manual Control/Confirmation (6) button
on the control display each time the top of the row
is reached. Thus, the triggering which is performed
by the markers is performed manually by operator.
The Manual Control/Confirmation (6) button is
also used in adjusting the starting rotation and
correcting a row fault when seeding with marker.