Fantic Motor TL 250, Руководство по ремонту

Страница: 105 / 138

105 105
CHAPTER 18
ENGINE
WORKSHOP MANUAL
TL 250
Remove the M6×25 bolt from the cylinder head and block.
Remove the four M10×1.25 nuts and remove the four 10.5×2×20
washers belonging to the bolts.
Remove the cylinder head.
18.4.3 Cylinder head cover disassembly
Remove the two M14×1 bolts from the locating plate on the
rocker arm shaft on the cylinder head cover.
Remove the intake and exhaust rocker arm shaft and intake
and exhaust rocker arm.
18.4.4 Disassemble the cylinder head
Use the special tool to press down on the spring and remove
the valve keepers, springs and valves.
Suitably mark all parts removed and make
sure you refit them in their original position
!