Fantic Motor TL 250, Руководство по ремонту

Страница: 111 / 138

111 111
CHAPTER 18
ENGINE
WORKSHOP MANUAL
TL 250
M
Adjust intake and exhaust valve clearance:
0.04 to 0.06 mm.
Fit the valve cap on the cylinder head cover and tighten.
Torque setting:
Cylinder head cover fastening bolts
11 ~ 13 Nm (1.1 ~ 1.3 kgf·m, 8.1 ~ 9.6 lbf·ft)
18.4.17 Checking and adjusting tappets
With the engine cold, on the left-hand side of the engine,
remove caps "A" and "B" from the ignition cover, caps "C"
and "D" from the tappet cover, covers "E" on the head, and
the spark plug.
Insert the special key "F" in the hole in the cover.
Rotate the engine anticlockwise and match up points "G" and
"H".
Point "I" corresponds to the timing position at engine
ignition.
Insert the feeler gauge "L" and adjust to the correct value.
Tappet adjustment thickness "M": 0.5 mm to 0.7 mm.