Fantic Motor TL 250, Руководство по ремонту

Страница: 102 / 138

102 102
CHAPTER 18
ENGINE
WORKSHOP MANUAL
TL 250
B C
D
E
Remove the three engine mounts "J" and swingarm bolt "K".
Remove the engine from the vehicle.
Torque settings:
• M10 screws: 50 Nm (5.0 m•kg, 36 ft•lb)
• M8 screws: 27 Nm (2.7 m•kg, 20 ft•lb)
Repeat the procedure in reverse to refit.
18.2 CHANGING ENGINE OIL AND ENGINE OIL FILTERS
Stand the motorcycle perfectly upright.
Remove the M16 oil drain bolt "A" from the bottom of the engine.
Remove the M20 bolt "B" from the primary filter on the
engine's left-hand side and remove the primary filter "C".
Remove the M20 bolt "D" from the primary filter on the
engine's right-hand side and remove the primary filter "E".