Fantic Motor TL 250, Руководство по ремонту

Страница: 117 / 138

117 117
CHAPTER 18
ENGINE
WORKSHOP MANUAL
TL 250
18.5.15 Remove the starter motor
Remove the screw fastening the starter motor and remove the
motor.
18.5.16 Remove the gearshift
Remove the screws fastening the shift star.
Remove the shift lever components.
Remove the screws fastening the index plate assembly and
remove the washer and the index plate assembly.
18.5.17 Inspect the crankcase cover on the right side
Check the right-hand crankcase cover oil gasket for damage.
If the gasket is damaged, replace it.
Check the oil seal on the clutch cover on the outer end of the
crankshaft, where necessary replace the oil seal with a new
one with the marking facing out.
Check the starter shaft oil seal for damage. If the seal is
damaged, replace it.
18.5.18 Inspect the water pump shaft, impeller, water seal
assembly and oil seal
Check the oil pump impeller for damaged or loose connections.
If there is any such issue, replace the impeller.
Check the water seal assembly and oil seal for damage and
check the water pump shaft for excessive wear or warp. If there
is any such issue, replace the water seal assembly, oil seal and
water pump shaft.