FANOX SIL-A A Series, Руководство пользователя

Страница: 89 / 112

www.fanox.com Rev.04 89/112
8.16 Test program
The SIL-A relay is equipped with a test menu from where the led and outputs operation can be checked.
The following tables show the components that can be tested, along with their status depending on
whether they are activated or deactivated:
From standby screen, p ress ◄,▼,► sequentially and hold OK until the ‘ Test menu ’ appears on the
display. The relay will ask for the password ‘ 5555 ’ to be entered in the test menu (or other if the customer
password by default is ‘ 5555 ’ has been modified).
The test menu is accessed by pressing the ‘ OK ’ key again, and the ‘▲’ and ‘▼’ keys can be used to
navigate through the different menu items. Each item can be activated or deactivated by pressing ‘ OK ’
on it (if the item is deactivated, it is activated by pressing OK; if the item is activated, it is deactivated by
pressing
‘ OK ’ ). Press the ‘ C ’ key to exit the test menu.
Once the relay is in test menu mode all the LEDs will be activated simultaneously. In case of the outputs,
they will be activated or deactivated by pressing OK key:
OUTPUT 1
Deactivated Output 1 deactivated
Activated Output 1 activated
OUTPUT 2
Deactivated Output 2 deactivated
Activated Output 2 activated
OUTPUT 3
Deactivated Output 3 deactivated
Activated Output 3 activated
OUTPUT 4
Deactivated Output 4 deactivated
Activated Output 4 activated
OUTPUT 5
Deactivated Output 5 deactivated
Activated Output 5 activated
OUTPUT 6
Deactivated Output 6 deactivated
Activated Output 6 activated
8.17 Power Supply
SIL-A is designed to be powered with an auxiliary voltage of 24-230 Vac/dc.
The supply guarantees between -20%/+10% of the auxiliary voltage. Outside this range the relay could
operate, but it is not guaranteed.