FANOX SIL-A A Series, Руководство пользователя

Страница: 100 / 112

www.fanox.com Rev.04 100/112
The ‘ OK ’ key is used to access the menus and the different options, as well as to approve changes to
values. The ‘ C ’ key is used to delete and to go back through the menu levels.
As well as the 6 keys, there is also a ‘ Reset ’ key. When ‘ Reset ’ is pressed, the LEDs indicators return
to their initial position. The ‘ Reset ’ key can also be used to delete all the events in the ‘ Events ’ menu,
the Fault Reports and the LDP.
This is equipped with two specific keys marked with 79, which permits operation on the recloser, blocking
and unblocking it.
It is also equipped with two specific keys marked with 52, which permits operation on the circuit breaker,
opening and closing it.
10.4 SICom Communications program
The SICom program, which works with the Windows 7, Windows 8, Windows 8.1 and Windows 10
operating systems is provided, and can be used to gain access to all of the relay information, to modify
the settings and to save events using a graphic user interface.
The following operations can be carried out using the SICom program (locally and remotely using
ModbusRTU):
•
Status reading
•
Measurement reading
•
Read, change and save settings
•
Read, change and save configuration
•
Read and delete events
•
Read and delete DFR
•
Configure and check the demand (LDP)
•
Date-time synchronisation
•
Set Counters
•
Execute Commands
•
Changing the user passwords
•
Loading settings files
•
Loading configuration files
•
Checking the versions of the relay