
Operating Manual for Operating Table SU-02.0
_____________________________________________________________________________________________________
2 Transport and first use
2.1 Transport
There is a possibility to transport the product by any covered transport means. While transporting, it is
necessary to immobilize the truck and protect it against moisture. In case of lack of original packaging,
the product should be properly secured in order to prevent its damage, preferably by experienced
transport company.
The transport conditions are as follows:
-
temperature: from –20
O
C to 60
O
C,
-
relative humidity: from 20% to 80%.
While product transporting, storage and unpacking, the temperature gradient should be less than 10
O
C
per hour. It is strongly recommended to unpack the product after reaching room temperature.
Laminar storage is permissible in accordance with the packaging marking. In the absence of the
marking, storied storage is prohibited.
In case of the specific transport conditions (particularly: low temperature transport), it is necessary to
negotiate the way of transport and product packaging with the product manufacturer in order to ensure
safe transport.
2.2 Unpacking and first use
Caution!
If the product is installed by an authorised service of FAMED S.A., the user is
released from the obligation to perform the activities described in this item.
The table is shipped by the producer in an assembled form in a wooden, open-work chest or in a
cardboard box with the following dimensions L:1340 x W:700 x H:890 mm and weight 200 kg. To avoid
damaging of the product, it should be unpacked and installed in the building.
To prepare the table for operation after its transport or delivery one should:
-
read carefully product operating manual
-
take off the fastening tapes
-
remove the package
-
remove the materials protecting the table during its transportation.
Caution!
Package may be marked with following signs:
- multiuse package
- package for recycling
low-density polyethylene packaging
LDPE
Package waste is recyclable and should be segregated before removed to a
disposal site. Returnable packaging should be returned to the producer of the
medical product
.
-
take out equipment
-
place the footrest horizontally (
item 3.5 Change of angular position of the footrests
)
-
remove blocking elements of the table,
_________________________________________________________________________________
page 12