Falcon 4-Channel, Руководство пользователя

Страница: 60 / 74

User’s Manual
52
Record Table Search
There are three view modes. Standard view, Expanded view and Compact view. Standard view (default) displays
combined recording information of all camera channels currently displayed on the screen. In the Standard view mode,
selecting the icon located at the bottom switches to the Expanded view mode. The Expanded view displays the
recording information of each camera channel currently displayed on the screen. Selecting the icon in the Standard
view mode switches to the Compact view mode which displays only the toolbar. Selecting the icon in the Compact
view mode switches to the Standard view mode, and selecting the icon in the Expanded view mode switches to the
Standard view mode.
Selecting or located at the bottom zooms the record table. Selecting displays eight hours (1-minute based), and
selecting displays 24 hours (3-minute based) at once. To move to earlier or later times that are not shown in the current
record table screen, select the arrows located at the end of the times by using the arrow buttons on the front panel.
NOTE: If the DVR has images recorded in more than one recording mode in the same time range, the recording
status bar displays recording information in the following priority order: Panic
 Pre-Event  Event  Time.
The color of the bar indicates different recording modes: Red for Panic, Yellow for Pre-Event, Purple for Event,
and Blue for Time.
Selecting located at the bottom displays the Calendar Search screen.
Selecting located at the bottom displays the Search menu.
 Go to: Displays the first or last recorded image, or searches by date and time (see the previous
Searching Video – Go To section of this chapter for more details).
 Clip-Copy: Clips a video segment and saves it (see the following Clip Copy section for more
details).
 Zoom: Zooms the current playback image.
 Enable De-Interlace: Turns the de-interlace filters on.
 Slow Play: Plays video at low speed (x1/2, x1/3, x1/4, x1/6 and x1/8).
< Compact View >
< Standard View >
< Expanded View >
Figure 65 ─ Record Table Search screen.
Recording information about video images currently displayed
on the screen displays on the recording status bar. A grey
vertical line indicates the current search position. To search
specific video, move the vertical line by using the
Left or
Right
arrow buttons on the front panel or by clicking the mouse
on the desired segment.
If the DVR’s time and date have been reset to a time that is
earlier than some recorded video, it is possible for the DVR
to have more than one video stream in the same time range.
In this case, the overlapping time range in the record table will
be separated by a yellow vertical line.
NOTE: The recorded data in the time range located after
the yellow vertical line is the latest.
Days with recorded video display on the calendar with white numbers. You
can highlight the days with recorded video by using the arrow buttons. Once
you have highlighted a day, press the (Enter) button to select it. The first
recorded image of the selected date will pause on the screen. Once you have
selected the date you want to search, review the surrounding video by using
the playback controls located at the bottom of the Record Table Search screen.