Falcon 4-Channel, Руководство пользователя

Страница: 19 / 74

4-Channel Digital Video Recorder
11
System Setup
Figure 8 ─ System menu.
Information
Highlight
Information and press the button. The Information setup screen appears.
NOTE: The System ID number is used to identify the unit when it is connected with other DVRs through the
RS485 port. You cannot use the same ID number for two or more DVRs that are in the same RS485 network. It
is possible to have multiple DVRs with System ID 0 that are in the same area as long as they are not part of an
RS485 network. If this is the case, all will be controlled at the same time when using the infrared remote control.
Highlight the box beside Language and press button. A drop-down menu displays the available languages. Highlight
the desired language and press the button.
The box beside
Version
displays the software version of the DVR.
To upgrade the software, connect a USB device containing the upgrade package file to the DVR. Highlight Upgrade…
and press the button. The Upgrade screen appears.
CAUTION: The system restarts automatically after completing the upgrade, and it takes approximately
one minute to restart. Do NOT remove the USB device until the DVR restarts, otherwise the system
upgrade will not be completed properly.
CAUTION: The USB device must be FAT16 or FAT32 format.
Figure 9 ─ Information setup screen.
In the Information screen, you can name the site location,
assign a System ID number, select the language the screens
are displayed in, display software version number, upgrade
the software, show the System Log, display recorded time
data, and clear all data.
Highlight the Site box and press the button. A virtual
keyboard appears that you can use to enter a Site Name.
Once you have entered your title, highlight Close and press
the button.
Highlight the box beside System ID and press the button.
Change the number by highlighting it and using the Up and
Down arrow buttons to increase and decrease the number from
0 to 99.
The screen displays the upgrade package file names that are available. The “
.rui
”
indicates that the file is for software upgrades. Select the desired file and press
the button.
Highlighting the
Install
button and pressing the button will install the selected
software package. Highlighting the Cancel button and pressing the button
will close the window without upgrading the software. If the upgrade package
file is not installed on the DVR properly, you will get an error message.