![background image](http://html1.mh-extra.com/html/faac/fsw900/fsw900_manual_3212782026.webp)
L
L
OOPS
OOPS
& L
& L
OOP
OOP
D
D
ETECTORS
ETECTORS
P
LUG
-I
N
L
OOP
D
ETECTOR
C
ONNECTIONS
:
The gate operator may utilize PLD1500 Plug-in Loop Detectors to simplify installation, save space and eliminate extra wiring.
There are three plug-in terminals (Shadow, Reverse, Open) located on the gate controller. Detectors plugged into a specific
socket will perform that function. To connect a PLD1500:
E
XTERNAL
L
OOP
D
ETECTOR
C
ONNECTIONS
:
The gate operator may utilize external Loop Detectors. Refer to the manufacturer’s instructions for detailed wiring.
Plug-In Loop Detector Inputs:
1. Shadow Loop: Plug detector into left socket. Make sure
detector is secure and snapped in.
2. Reverse Loop: Plug detector into center socket. Make
sure detector is secure and snapped in.
3. Open Loop: Plug detector into right socket. Make sure
detector is secure and snapped in.
4. Set different frequencies for each loop detector.
5. Follow the directions provided with the PLD1500 for
more detailed settings.
Ground Loop Wire Connections:
1. Connect Reverse Loops wires to REVERSE 1 and 2. For
fail safe operation connect reverse loops in series.
2. Connect Open Loop wires to OPEN 1 and 2.
3. Connect Shadow Loop wires to SHADOW 1 and 2
External Loop Detector Inputs:
1. 24VDC is available to power external loop detectors.
Connect 24VDC detector power to +24VDC and
COMMON.
2. Shadow Loop: Connect relay wires to SHADOW N.O.
and COMMON..
3. Reverse Loop: Connect relay wires to REVERSE N.O.
and COMMON.
4. Open Loop: Connect relay wires to OPEN N.O. and
COMMON.
5. Set different frequencies for each loop detector.
6. Follow the directions
provided by the external
loop detector manufacturer
for more detailed settings.
R
EVERSE
L
OOP
R
EVERSE
L
OOP
O
PEN
L
OOP
4-5 Feet
4-5 Feet
SHADOW
L
OOP
FSW900 Swing Gate Operator
26
4 Feet
4 Feet