I
I
MPORTANT
MPORTANT
S
S
AFETY
AFETY
I
I
NFORMATION
NFORMATION
M
ANUAL
R
ELEASE
:
To manually release the gate operator:
1.
TURN POWER OFF
. Use the emergency release/shut off only when the gate is not moving. Make sure power for the
gate operator is OFF by using the On/Off switch located inside the cover on the left side of the controller.
2. Remove the top arm cap cover.
3. Lift the Release Handle.
4. Remove the Alignment Pin.
5. Move the gate to the desired location.
To reengage the gate operator:
1. Make sure power is OFF.
2. Manually move the gate to align the arm with the output shaft and insert the Alignment Pin.
3. Press the Release Handle down until tight. The release handle should be tightened so the arm connector does not slip
on the output shaft during gate operation
4. Attach the top arm cap cover.
5. Turn power on. Make sure the gate and all reversing devices are operating correctly.
FSW900 Swing Gate Operator
8
