![background image](http://html1.mh-extra.com/html/faac/fsw900/fsw900_manual_3212782022.webp)
A
A
CCESSORY
CCESSORY
C
C
ONNECTIONS
ONNECTIONS
A
CCESS
C
ONTROL
C
ONNECTION
:
Access Control Devices such as Telephone Entry Systems, Digital Locks and Card Readers may be connected to the Access
Input to control the gate operator. When an Access Device is active, the Access LED will light.
F
IRE
L
OCK
C
ONNECTION
:
Fire Lock Controls such as Knox Locks and Fire Boxes may be connected to the Fire Input to control the gate operator. When
a Fire Lock Control is active, the Fire LED will light.
Fire Input:
1. Allows Fire Lock Controls to activate the gate.
2. This input knows the position of the gate and will only
open the gate when activated.
3. If Close Time Delay is ON, gate will open and remain
open until the fire control relay is released. Then the
gate will time out and close.
4. If Close Time Delay is OFF and the gate is in closed
position, gate will open and remain open until an
external input of any sort closes the gate.
5. If Close Time Delay is OFF and gate is in open position,
gate will remain open until an external input is made.
This prevents the Fire Input from closing the gate if in the
open position.
Connecting Access Devices:
1. Connect Fire Lock Control relays to FIRE and
COMMON. (Most devices use Normally Closed &
Common)
NOTE:
Consult your local Fire
Department for proper building codes and Fire Lock
requirements.
FIRE
LOCK
Access Input:
1. Allows external Access Control Devices to activate the
gate.
2. If Close Time Delay is ON, gate will open and remain
open until the access device relay is released. Then the
gate will time out and close.
3. If Close Time Delay is OFF and the gate is in closed or
open position, gate will travel in the opposite direction.
4. If Close Time Delay is OFF and the gate is in mid cycle,
the gate will stop. The direction will not be changed until
another valid input is made.
Connecting Access Devices:
1. Connect Access Control Device relays to ACCESS and
COMMON. (Most devices use Normally Open &
Common)
2. Only connect devices that are in line of sight to this input.
If the access device is not in line of sight, connect it to
the radio input.
1 2
3
4 5
6
7 8
9
*
0
#
Card Access
1
2
3
4
5
6
7
8
9
*
0
#
Phone Entry
FSW900 Swing Gate Operator
22