Bracket Release Position
8.
Insert the bracket bushing into the gate mounting bracket.
Inside the black bushing you will see a small bump,
this bump must be facing away from the post to
prevent binding.
9.
Insert the manual re-
lease key and turn it
5
counter clockwise
turns
.
This will position the front fitting on the operator arm in the correct position to fit into the bracket
bushing.
5 Counter Clockwise turns from end.
10.
While holding
the front fitting in
the bracket bushing
and gate mounting
bracket, insert the
manual release key.
Turn the key
clockwise
until the front fitting reaches the front stop position.
The bracket bushing is now locked in position on the front fitting.
NOTE: The front stop position
IS NOT THE FULL CLOSED POSI-
TION,
it is the common point of reference for counting manual turns.
Turn Clockwise to end as a common point of reference.
11. NOTE: Returning to
the common point of ref-
erence during the last
step is important for ac-
curacy in this step.
From the front stop posi-
tion turn the manual release key
counter clockwise
3 turns
.
This will be the mounting
position.
3 Turns Counter Clockwise
-
This is the correct Closed Gate mounting position.
Important - Please adhere to this step
3.4
Estate Swing
Содержание Estate Swing E-S 1100 Series
Страница 51: ...9 4 Estate Swing...