![background image](http://html1.mh-extra.com/html/faac/estate-swing-e-s-1100-series/estate-swing-e-s-1100-series_instruction-manual_3205477038.webp)
Examples of industrial
door stops
Push-to-Open Operation
Push
-
to
-
Open operation is a gate opener design with the
arm on the inside of the
gate and the arm pushes the gate open away from the property
, rather than
pulling it in towards the property as in standard operation. Push
-
to
-
Open is useful
for properties with inclining driveways, a lack of space for opener arm placement or
opening (i.e. a wall parallel with the driveway close to the post), or many other rea-
sons.
Installation of PTO Mounting Hardware
1.
Set up open stop points for your gate.
The open stop points can be a plate on the
end of the gate that comes in contact with
an adjacent post or an industrial door stop.
(Many gates need an extension piece added
to make contact with the doorstop.
Examples of stops
8.1
Ex
am
ple
of
PTO
se
tba
ck
The Push
-
to
-
Open setback
is the standard setback
flipped horizontally.
Measure 5” back toward the
property then make a 90
degree turn towards the
driveway. Measure 5” in
towards the driveway, this
point is the back pivot point
for your operator arm.
Estate Swing
Содержание Estate Swing E-S 1100 Series
Страница 51: ...9 4 Estate Swing...