FAAC Estate Swing E-S 1100 Series, Инструкция по эксплуатации

Страница: 9 / 53

Too
ls N
ee
ded
Power Drill
Crescent Wrench
3/8”, 1/4”, Drill Bits
Hacksaw
Flat Head Screwdriver
Phillips Head Screwdriver
Tape Measure
Level
Wire Strippers
C - clamps
Other items that may be needed prior to commencing installation. Bolded items are necessary
to all applications.
Start and stop post, bracket or door stop. It is absolutely necessar y for the Estate Swing to have a
permanent closed position stop post or bracket, which is (If doing 1 touch programming it will require
one in the open position as well.)
16 gauge 2 conductor stranded direct burial low voltage wire will be required to run power to
your operator.
Length is determined by distance between tr ansfor mer power supply and the con-
trol box.
2 - 3/8” Carriage Bolts with nuts and washers will be needed to connect the “L” shaped. Length
will be determined by the size of your posts.
A metal support bracket may be needed to achieve the appropriate 5”x 5” setback. The metal support
bracket will be bolted or welded to your post to give a larger amount of space to mount the provided
mounting bracket.
A voltage meter and digital camera may be necessary to run diagnostic checks.
If your transformer is going to be plugged into an outdoor outlet you will need to weatherproof that out-
let and transformer. Electrical boxes or plug covers can be obtained from a local hardware store to ac-
commodate both the plug and transformer.
Hardware to attach the control box to a post or fence.
Watertight connectors for running wires into the control box.
Protect all ingoing and outgoing wires with a surge suppressor. Consult your local dealer
for more information.
1.4
Estate Swing