![background image](http://html1.mh-extra.com/html/faac/estate-swing-e-s-1100-series/estate-swing-e-s-1100-series_instruction-manual_3205477024.webp)
Programming Gate Movement Variables
Using the following procedures you can change factory settings such as auto
close, speed, force, delays and more.
Begin the programming process by pressing
P1.
Pressing
P1
se-
lects
A,B,C,D or E
. A, B, C, D and E correspond with the varia-
bles in the chart on the following page.
When you are on the desired variable you would like to change the
setting of press
P2
to change the setting of that variable.
P2
will
change the light to 1, 2, 3 or 4 which correspond with the settings
on the chart below on the following page. Below is a list what each
variable controls.
A:
Switches between Function Logics. Function Logics are sets
of actions that will occur when an accessory terminal connection is
made or disrupted. Each set of actions is designed to give different
results providing increased safety, convenience or other.
B:
Switches between the amount of time the gate pauses before closing after reaching
full open. By selecting Logic EP (4) all pause times will be void and the gate will remain
open until an opening devices is triggered.
C:
Switches between the amount of time the gate waits before beginning motion when
an opening and closing is triggered or if dual gates are installed, pause time will only apply
to one gate.
D:
Switches between the amount of force the gate opener will exert before an obstruc-
tion is detected and the gate reverses directions.
E:
Switches between the speed of the gate motion. This does not effect the soft start
and stop.
See the following page for Gate Movement Variables LED Chart .
Controlling the Master Leaf with either the Master or Slave Control Board
With this function you can select the leaf you wish to move with the Master Control Board.
Press and hold down
P1
, then press and hold down
P2
. LED A starts flashing. Using
P2
move
from LED 1 to LED 2 according to the desired leaf control as described below:
LED 1
lit
-
Master controls leaf 1 (default)
LED 2
lit
-
Master controls leaf 2
NOTE:
The oper ation of the Slave Contr ol Boar d is automatically set accor ding to the Master Contr ol
Board.
6.1
Estate Swing
Содержание Estate Swing E-S 1100 Series
Страница 51: ...9 4 Estate Swing...