Extron electronics VNM EC 200, Руководство пользователя, Страница: 56 / 242

Connections Menu
When devices are part of an active (launched) preset, the columns populate with the
connection details of the selected VN-Matrix device (see figure 34). Click
Connections
(see figure 31 on page 43) to open the
Connections
dialog box.
VNM 200/225
VNM 300/325
VNM 250
1
2
3
4
5
6
Figure 34. Connections Dialog Box
NOTE: The VN-Matrix 3
xx
connections dialog changes the Whiteboard column to FEC
Rows and the Data column to FEC Cols .
The following fields are read-only (cannot be edited).
1
Description — For a source, this field is the name of devices receiving a stream from
the selected source. For a display, it has the name of the device providing the stream.
2
id — Displays the device ID of the connected device.
3
Source — For unicast transports, displays the IP address and port number of the
source stream. For multicast transports this value is zero on an encoder.
4
Destination
— Displays the IP address and port number of the stream receiver device.
5
Locale — This field displays loc when the data streaming between source and
display are controlled by the same controller ( loc ). It displays ext if the data stream is
exported across two different controllers or if the transport protocol is multicast RTP.
6
Slot — This field displays information depending on the type of transport protocol used.
•
For unicast RTP , the stream number is displayed. Four streams are available,
numbered 0 , 1 , 2 , and 3 .
•
For multicast RTP , this field displays
0
for a source and
-1
for a display.
VNM EC 200 • Device Configuration and Control 46