manualshive.com logo in svg

Extron electronics VNM EC 200, Руководство пользователя, Страница: 186 / 242

Поделиться
Скачать
Extron electronics VNM EC 200 Скачать руководство пользователя страница 186

Configuration panel (

2

)

Use this panel (see 

figure 167

, 

2

 on page 175) to configure the following options.

NOTES:

 

• 

The 

Cluster

 

IP

 

Address

, 

Test

 

Switch

 

on

 

Powerup

, and 

Switch

 

 

IP

 

Address

 fields can be configured using any VNM EC 200 within the cluster.

• 

The 

Crossover

 

Subnet

 field must be individually set on each  

VNM EC 200 within the cluster. The entered values must be identical.

• 

Cluster IP Address 

 — This field is used to set the cluster (shared) IP address for the 

controller pair. This IP address is used as the controller address by the other devices in 
the VN-Matrix system. Both the primary and secondary VNM EC 200s (whichever one is 
active) use the cluster IP address for all system control communications. For information 
on setting the cluster IP address, see 

Setting the Cluster IP Address

 on page 168.

• 

Test Switch on Powerup

 — Selecting this check box causes the primary and 

secondary VNM EC 200s, when first powered on, to wait until they are both able to 
communicate with the network switch before determining which controller (primary or 
secondary) is the best device to manage the VN-Matrix system.

• 

Switch IP Address 

 — This field is used to set the IP address of the network switch 

that is being used in the VN-Matrix system.

NOTE:

  This field must contain an IP address for the 

Test

 

Switch

 

on

 

Powerup

 

function to work.

• 

Crossover Subnet

 — This field displays the IP address of the crossover subnet 

Ethernet ports (LAN B [eth1]). The crossover subnet monitors the status of the primary 
and secondary VNM EC 200s when the system is configured for redundant operation. 
For information on setting the crossover subnet, see 

Setting the Crossover Subnet 

IP Address (Eth1)

 on page 171.

NOTE:

  This field can be edited when the VNM EC 200 cluster is unpaired (see 

Unpairing controllers

 on page 177).

Setting the Test Switch on Powerup option

1. 

Select the 

Test

 

Switch

 

on

 

Powerup:

 check box to activate this option or deselect 

the check box to deactivate this option (see 

figure 167

, 

2

 on page 175) .

2. 

Click 

Apply

 

Changes

 (

4

), to save the setting.

Setting the Switch IP Address

1. 

In the 

Switch

 

IP

 

Address:

 field (

2

), enter the desired IP address.

2. 

Click 

Apply

 

Changes

 (

4

), to save the setting.

 

VNM EC 200 • Dual (Redundant) Controller Configuration

176

Содержание VNM EC 200



















































































































































































































































Отзывы:

Нет отзывов