manualshive.com logo in svg

Extron electronics VNM EC 200, Руководство пользователя, Страница: 48 / 242

Поделиться
Скачать
Extron electronics VNM EC 200 Скачать руководство пользователя страница 48

VN-Matrix Device 
Configuration and 
Control

The VN-Matrix EC 200 is the center of an audio and video streaming network that connects 
and controls VN-Matrix hardware encoders, decoders, recorders, and software decoders.
The EC 200 can control all VN-Matrix devices residing on the same network. Each matrix 
device must have its system controller IP address set to the IP address of the EC 200.
The VN-Matrix devices are monitored and configured from the 

Device

 

List

 page. 

Connections between the devices are made on the 

Preset

 

Manager

 page and can also 

be made on the 

Switcher

 page. To enable rapid system configuration, the presets are 

saved for later use.
This section provides instructions on how to view VN-Matrix codecs, recorders, and 
software decoders on a VNM EC 200, configure the devices for proper operation, and to 
operate those devices in a VN-Matrix network.
Sections include:

• 

Devices Page Overview

• 

Devices Page Features

• 

Actions Menu Bar Overview

• 

Actions Menu Bar Features

• 

Device Configuration

• 

VNM 200/225/300/325 Configuration

• 

VNM 250 Configuration

• 

Recorder Configuration

• 

VNS 104 Software Decoder Configuration

• 

Switcher Page

For the VNM EC 200 to operate and control devices on the network:

• 

Update each VN-Matrix device with the IP address of the VNM EC 200 and configure 
them to operate on the same network as the VNM EC 200.

• 

Access the VNM EC 200 Web-based user interface from a control computer on the 
same network by entering the IP address of the VNM EC 200 into the address bar of a 
Web browser (see 

Accessing the Web‑based User Interface

 on page 11).

• 

Use the Web-based user interface to select one or more devices from the 

Devices

 

page and use the 

Actions

 menu bar at the bottom of the page to configure the 

selected device (see 

Devices Page Features

 on page 39).

For information on the configuration of VN-Matrix devices, see the user guide for each 
device.

VNM EC 200 • Device Configuration and Control

38

Содержание VNM EC 200



















































































































































































































































Отзывы:

Нет отзывов