Extron electronics VNM EC 200, Руководство пользователя, Страница: 116 / 242

Device Attributes – VN-Matrix Recorder: Play Mode
The 5-channel VN-Matrix Recorder in player mode operates with Ch1 set as the master for
all channels (see figure 84, left).
1
2
3
4
5
6
7
8 1
2
3
9
9
Figure 84. Device Attributes, 5‑channel Player
The player device attributes for a 5-channel device provide the following functions:
NOTE: The attributes for individual channels 2, 3, 4, and 5 (shown in figure 84, right) are
a reduced set of the attributes for Ch1.
1
Name
— Read-only field displays the device name and selected sub-channel number.
2
Directory — Opens the recorder browser for directory level navigation and selection.
3
File — Opens the directory listed in the Directory field to enable selection of a single
recorded file and displays the filename.
4
Launch Status — Drop-down control to define the start condition of a Play or Record
preset.
•
Play (player channel 1 only) — When the preset is launched, playback begins
immediately.
•
Provision — Delays playback until the appropriate command is sent from the
transport bar or from an external control system.
5
Repeat — A drop-down control sets a player into loop mode.
6
Time Sync — A drop-down control that sets the timing relationship between the
channels on multiple devices in a player preset.
7
Start Offset — Editable field that sets the start time of a selected file.
8
Stop Offset — Editable field that sets the stop time of a selected file.
9
File Length — Displays the length of the recording in hh:mm:ss format.
VNM EC 200 • Preset Manager 106