Extron electronics VNM EC 200, Руководство пользователя, Страница: 179 / 242

Adding the VNM EC 200s to the Controller List
Use the following procedure to add the VNM EC 200s to the controller list (see Accessing
the Web‑based User Interface on page 11).
1. Log in to the redundant primary VNM EC 200 and click the Configuration tab.
The Configuration page opens (see figure 162,
1
).
2 2
3 3
4 4
1 1
Figure 162. Configuration Page — Adding Controllers to the Controller List
2. Click the System config link (
2
).
3. In the
Controllers
field, click
Add
(
3
).
4. Enter the cluster IP address of the VNM EC 200 pair into the dialog box (not shown) and
click
OK .
NOTE:
If necessary, clear the Controllers field. Highlight the IP addresses and
click Delete .
5. Click Apply Changes to save the configuration (
4
).
The VNM EC 200 restarts the user interface and is assigned as the system controller.
6. Log in to the redundant secondary VNM EC 200 and repeat this procedure.
VNM EC 200 • Dual (Redundant) Controller Configuration 169