Extron electronics VNM EC 200, Руководство пользователя, Страница: 147 / 242

12. Select manual from the Blanking drop-down list (see Figure 128 ,
4
on the
previous page).
13. Enter 0 in the Pixels field (
5
).
14. Enter 0 in the Lines field (
6
).
Leave the Source Format window open.
15. Using the right tab (see figure 129,
1
), select the Format Editor page (
2
).
16. Select an input mode from the list of source formats (
3
).
NOTE: If the frame rate or the resolution of the source is already known, select a
similar source format. Otherwise, select any source format from the list.
3 3
2 2
4 4
1 1
Figure 129. Source Format Editor Page (VN‑Matrix 2xx Only)
17. Click SaveAs (
4
), to save the resolution.
18. In the Save Source Format As dialog box, enter a name for the new source format
and click OK (see figure 130).
Figure 130. Saving a Source Format
NOTES:
• Resolutions must be saved using the following format at the beginning of the
filename: <
Hres> x <Vres> <Frame_Rate><Format>
• The end of the filename can contain identifying characters.
Examples:
640 x 400 85p
640 x 400 85p TEST
720 x 480 59.94p HDFrEND
VNM EC 200 • Format Editor Page 137